Instruction Manual

~ 128 ~
STARTING OF A
PROGRAMME
Open the tap first and then close the door.
Press the « START / STOP » - BUTTON to start the set
cleaning programme. The programme starts after
approx. 10 seconds.
END OF A PROGRAMME
Switch off the appliance using the « ON / OFF » -
BUTTON.
OPENING THE DOOR: wait a few minutes before you
open the door after a cleaning programme has
finished as hot steam may escape.
WARNING! Open the door carefully. Hot
water vapour can escape when the door has
been opened!
CLOSE THE TAP,
UNLOAD THE RACKS
Close the tap.
Wait approx. 15 minutes, before you unload the
racks.
Unload the lower rack first.
WARNING! Open the door of the appliance very carefully. Hot water
vapour can escape when the door has been opened! RISK OF
SCALDING!
WARNING! When a cleaning programme has finished, wait at least 20
minutes before cleaning the interior of the appliance so the heating
elements can cool down. RISK OF BURNS!