Instruction Manual

~ 123 ~
HOW TO SET THE RINSE AID CONSUMPTION LEVEL
1. Turn the rotary knob to the desired rinse aid
consumption level.
a. Start with rinse aid consumption level « 4 ».
b. Select rinse aid consumption level « 5 » when stains
have occurred or the drying is not satisfying.
c. Select rinse aid consumption level « 6 » if these
problems occur again.
Rinse aid consumption level « 5 »
44
is the default setting.
Y
ROTARY KNOB
4.3 Dishwasher detergent
DISHWASHER DETERGENTS ARE DIVIDED INTO 2 GROUPS DUE TO THEIR
CHEMICAL COMPOSITION:
➢ conventional, alkaline detergents with caustic components.
➢ low-alkaline concentrated detergents with natural enzymes.
"Normal" programmes combined with concentrated detergents prevent pollution
and are also good for your dishes. Such programmes support the cleaning effect of
the enzymes. Therefore, "normal" programmes combined with concentrated
detergents are as effective as "intensive" programmes.
THERE ARE 3 KINDS OF DISHWASHER DETERGENTS:
1. with phosphate and chlorine.
2. with phosphate / without chlorine
3. without phosphate / without chlorine
Most recent powdered dishwasher detergents usually do not contain any phosphate,
so they do not soften the water. In such a case add a water softener (= dishwasher
salt) even if the hardness of water is e.g., 6°dH. Otherwise, white spots may occur
on your dishes and glasses.
Dishwasher detergents without chlorine only bleach slightly, so they do not remove
tough stains. In such a case select a programme with a higher temperature.
44
Depending on model.