Instruction Manual

~ 120 ~
*
FACTORY SETTING
**
SEE FIG. BELOW.
STEP 3: EXIT WATER SOFTENER SETTING MODE
➢ Press the « ON / OFF » - BUTTON to save the water softener consumption setting
and exit the setting mode.
4.2 Rinse aid
❖ Your appliance is designed for using rinse aid. The rinse aid is added automatically
during operation and supports the spot-free and perfect drying of the dishes.
❖ The rinse aid container is inside the appliance near the dishwasher detergent
container.
❖ Max. capacity of the container: approx. 140 ml.
❖ Do not overfill the container; otherwise, severe foam formation may occur.
❖ Do not forget to close the flap of the rinse aid container after refilling.
❖ When the rinse aid indicator « » is off, the colour of the rinse aid indicator
« X »
41
indicates the needed quantity of rinse aid.
➢ Dark spot = container filled to capacity.
➢ The smaller the spot the emptier the container (s. fig. below). The container
should be filled not less than 25 %.
41
Depending on model.