Instruction Manual

~ 119 ~
You need to get the information on the local water hardness range. You can
receive all relevant information from your local water supplier.
STEP 1: ENTER WATER SOFTENER SETTING MODE
1. Switch on the appliance using the « ON / OFF » - BUTTON (s. chapter 3.2 VIEW OF
THE CONTROL PANEL: OPERATING BUTTONS AND INDICATORS).
2. Within 60 seconds after you have switched on the appliance, press and hold the
« PROGRAMME » - BUTTON for more than 5 seconds.
3. The appliance is now in water softener setting-mode.
4. The programme indicator displays the current status of the water softener
consumption by lighting up the corresponding LED combination: e.g. water
softener level « H 3 » = LED 1 and LED 2 goes on (s. table below).
STEP 2: SETTING OF THE WATER SOFTENER CONSUMPTION
1. To select the proper water softener consumption setting according to your local
requirements, press the « PROGRAMME » - BUTTON repeatedly until the desired
water softener level (H 1 - H 6) is displayed by the corresponding LED
combination lighting up on the programme indicator (s. table below).
2. Each press of the « PROGRAMME » - BUTTON changes the consumption setting by
one level and the corresponding LED combination goes on. The settings are
consecutive: H 1 → H 2 → H 3 → H 4 → H 5 → H 6 → H 1 (s. table below).
Water softener (= dishwasher salt) is added to a running programme by the
appliance automatically. When and how much water softener the appliance adds
to a running programme depends on the individually set water softener level
(H 1 - H 6); s. relevant table in chapter 4.1.2 WATER HARDNESS LEVELS / WATER
SOFTENER CONSUMPTION.
WATER HARDNESS
RANGE
SETTING OF
THE WATER
SOFTENER
CONSUMPTION
PROGRAMME INDICATORS
°dH
LED 1**
LED 2**
LED 3**
0 - 5
H 1
on
-
-
6 - 11
H 2
-
on
-
12 - 17
H 3*
on
on
-
18 - 22
H 4
-
-
on
23 - 34
H 5
on
-
on
25 - 55
H 6
-
on
on