Instructions

73
7.2 Spray arms
➢ Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
➢ To remove the upper spray arm unscrew
the nut (clockwise) and remove the spray
arm. To remove the lower spray arm, lift
it upwards.
➢ Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
➢ Rinse the spray arm with flowing water
and reinstall it.
1: open.
7.3 Control panel and appliance
❖ Clean the control panel with a soft damp cloth and dry it carefully.
❖ Clean the exterior of the appliance with a suitable polish.
❖ Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean any
component of the appliance.
7.4 Door
❖ Clean the sides of the door with a warm damp cloth.
❖ Clean the exterior surface with a suitable polish.
❖ Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean the door of
the appliance.
❖ Clean the door seals with a damp sponge; otherwise remnants of food may
generate unpleasant odours.
❖ NOTICE! Never clean the door with a cleaner spray as you may
damage the lock and the electrical components.
7.5 Decommissioning
1. When you do not operate the appliance for a certain period of time, e.g. during
holidays/vacancies, let a programme run (empty appliance) before.
2. Disconnect the plug und turn off the water supply of the appliance.