Instructions

72
1. The flat filter catches remnants
by a special nozzle on the bottom
of the spray arm.
2. The coarse filter catches
remnants such as bones and glass
which may clog the drain. To
remove the remnants press the
upper pins and take out the coarse
filter.
3. The micro filter catches
remnants in the drain so they
cannot soil the dishes again.
The filter system protects the pump against remnants of food and other objects.
These remnants can clog the filters after a while. The filter system comprises a
coarse filter, a flat filter and a micro filter.
➢ Check the status of the filters after each programme.
➢ When you remove the coarse filter, you can remove all filters of the system.
Remove any remnants and clean the filters with flowing water.
1. Turn the filter in anticlockwise direction.
2. Take out the filter unit.
3. When operating from step 1 to 2, you remove the filter system, when operating
from step 2 to 1, you install the filter system.
❖ We recommend to clean the entire filter system once a week.
❖ Remove bigger remnants after each programme.
❖ Clean the coarse and micro filter with a washing-up brush.
❖ Do not knock against the filters as you will damage them. Your appliance will
not work properly if the filters are damaged.
❖ Always install the filters properly.
❖ Improperly installed filters may damage the appliance and dishes.