Instructions

62
6. You should start a programme immediately after filling (we recommend a short
programme). Otherwise the filter system, the pump or other parts of the
appliance can be damaged due to the salt water. Such damages are not covered
by the guarantee.
NOTICE!
Only fill the container when the water hardness indicator
6
has gone on.
The indicator may remain active until the water softener is completely
dissolved. If some water softener has been spilt, you can set the Quick
or Soft programme to remove any remnants.
4.4 Filling of the rinse aid container
❖ The rinse aid is added automatically during operation and supports the spot-free
and perfect drying of the dishes. Your appliance is designed for using rinse aid.
❖ The rinse aid container is in the door beside the detergent container. Open the
lid and fill the container until the level indicator (C) has become black. The
capacity of the container is 110 ml.
❖ Dark spot = container is full.
❖ The smaller the spot the emptier the container is. The container should be filled
not less than 25%.
1
Full
2
75 %
3
50 %
4
25 %; refill!
5
Empty
C
Indicator
6
Equipment depending on model.