Instructions

55
1. Stop the water supply completely.
2. Unscrew the water supply hose.
The water supply hose is a double-walled hose. This system interrupts the
water supply when the inner hose leaks. The interruption of the water supply is
carried out by an electronic contact.
2.4.1 Cold water connection
WARNING! Stop the water supply after operation to avoid remaining
water pressure in the water supply hose.
Connect the inlet hose to a connector with a 3/4 inch thread firmly and securely.
When the hoses are new or were not used for an extended period of time, let the
water flow until the hose is clear of any contamination. Otherwise the water inlet
may be blocked and the appliance will be damaged.
2.5 Connection of the drain hose
Lead the drain hose to a drain with a minimum diameter of 40 mm (B) or connect
it to a suitable drain (A). The maximum height of the drain hose connection is 1000
mm. The drain hose must be installed with a hose clamp.
1
Front
2
Drain hose
3
Worktop