Instructions

54
2.4 Water connection
➢ Only use new connection-kits for installation. The tap must be equipped with a
separate disconnector. Do not use used connection-kits.
➢ A water pressure from 0,04 MPa to 1 MPa is required. Please contact the
aftersales service
4
or a qualified professional if the water pressure differs.
1. Pull the supply hose completely out from the storage
compartment located at the back of the appliance.
2. Connect the water supply hose to a tap with a 3/4"-thread.
3. Turn the water fully on before starting the appliance.
Removing of the water supply hose:
4
Not included in guarantee.