Instructions

29
4. If the appliance is transported in a horizontal position, some oil may
flow from the compressor into the refrigerant circuit.
5. Leave the appliance in an upright position for 4-6 hours before you
switch it on to ensure, that the oil has flowed back into the
compressor.
6. The supply cord must not be caught under the appliance while or
after moving it.
Refrigerant circuit
1. Do not damage the refrigerant circuit. The appliance uses the
environmental-friendly refrigerant R600a. The refrigerant R600a is
flammable !!! Therefore the cooling circuit must not be damaged
in any way neither by transport nor use.
2. If any part of the cooling circuit is damaged, the appliance must not
stand near a fire, naked light or spark-generating devices. Contact
your after sales service immediately .
3. If gas is set free in your home:
Open all windows.
Do not unplug the appliance and do not use the control panel
or thermostat.
Do not touch the appliance until all the gas has gone.
Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the
appliance.
Inside the appliance
1. EXPLOSION HAZARD! Do not store any explosive materials or sprays,
which contain flammable propellants, in your appliance. Explosive mixtures
can explode there.
2. Do not put any gassy beverages into the appliance, because their containers
could explode.
3. Do not put hot liquids or hot foodstuff into the refrigerator.
Final safety instructions