Instructions

52
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that y ou are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
PREPARATORY MEASURES:
a) Empty the appliance.
b) If possible, remove all door trays, glass shelves and drawers from the fridge /
freezer so that they cannot be damaged.
c) It is necessary to tilt the appliance backwards while removing the doors. You
should rest the appliance on something solid so it will not slip while changing the
hinge positions.
d) Do not lay the unit flat as this can damage the cooling system.
e) All parts removed must be saved for proper reinstallation of the doors.
f) Always remove the doors carefully. Keep the doors in a safe place so that they
cannot be damaged.
CHANGE OF THE HINGE POSITION:
1. Unscrew the four screws in top cover and then lift it.
2. Unscrew the right upper hinge and remove it.
It may be necessary to remove the cover of the hinge previously (depending
on model).
3. Remove the pin with a screwdriver and flip the hinge bracket. Then refit the pin
to hinge bracket
4. Lift the upper door and remove it carefully.
5. Unscrew the right middle hinge and remove it.
6. Lift the lower door and remove it carefully.
7. Unscrew the right bottom hinge and remove it.
It may be necessary to unscrew the adjustable feet previously (depending on
model).