Instructions

35
Top cover
You can remove the top cover.
Position the top cover on the hinges properly after cleaning.
Oven-door
Remove the door for a complete cleaning procedure as described below.
Open the door completely, turn the clamps on the hinges by 180
0
, close the
door partially (until 30°), lift the door and pull it out from the front side.
Reinstall the door in reverse order.
DANGER! Never try to detect a gas leakage using matches; use soapy water.
Check the technical condition of the gas supply regularly. If any damage occurs a
qualified professional must repair the gas connection. You must replace hose-
connections regularly - always consult a qualified professional therefor. A qualified
professional should lubricate the burners regularly. Consult a qualified professional
if you detect any abnormal operation modes.
If your appliance does not operate properly, check article 1 and 2 below:
1. The gas conduction seems to be abnormal. Check that
a. the holes of the burner are not blocked.
b. the pressure controller operates properly.
c. the appliance is supplied with gas properly.
2. Odour of gas in the room. Check that
a. the rotary knob is in position OFF.
b. the gas inlet valve is positioned properly.
c. the gas inlet valve is in a proper condition.
DANGER!
When your appliance does not operate properly, consult the aftersales service
NEVER TRY TO REPAIR THE APPLIANCE YOURSELF.