Instructions
62
➢ Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
➢ To remove the spray arm screw off the
nut (anticlockwise). Take off the washer
at the top of the spray arm. Now remove
the spray arm.
➢ Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
➢ Rinse the spray arm with flowing water
and reinstall it.
7.3 Control panel and appliance
❖ Clean the control panel with a soft damp cloth and dry it carefully.
❖ Clean the exterior of the appliance with a suitable polish.
❖ Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean any component
of the appliance.
7.4 Door
❖ Clean the sides of the door with a warm damp cloth.
❖ Clean the exterior surface with a suitable polish.
❖ Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean the door of the
appliance.
❖ Clean the door seals with a damp sponge; otherwise remnants of food may
generate unpleasant odours.
❖ NOTICE! Never clean the door with a cleaner spray as you may
damage the lock and the electrical components.
7.5 Frost protection
If your appliance is situated in an unheated place during winter, consult a qualified
technician to carry out the following measures
6
.
1. Disconnect the appliance from the mains.
6
Not included in guarantee.