Instructions

43
Levelling
❖ You can level the appliance with the adjustable feet.
2.2 Water inlet / drainage installation
❖ Connect the cold water connection hose with a 3/4-inch thread connection and
make sure that it is securely tightened on both sides. Once on the cold water
connection and on the device itself.
❖ Make sure not to kink or crush the inlet hose. Do not use a used inlet hose.
❖ The inlet hose must not be shortened or damaged because it contains live parts.
❖ Connect the inlet hose with the hose screw connection to a water tap with an
external thread (3/4 inch).
❖ Check the tightness of the connections on both sides!
1. The water inlet and drainage installation must be carried out by a qualified
professional.
2. Use brand-new hoses and connector kids only.
3. We recommend to secure the water supply with a back pressure valve.
Water inlet hose installation
Permissible water pressure
Min. permissible pressure: 0,2 bar.
If the water pressure is lower than 1 bar,
please contact your aftersales service.
Max. permissible pressure: 0,98 Mpa.
Use a screw-on hose connector to connect the water inlet hose to a water tap with
a 3/4 inch external thread. Check that the connection does not leak. If the water
pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear and free of impurities.
Water outlet hose installation