Instructions

7. The appliance must be transported and installed by at least two persons.

8. When you unpack the appliance, you should take note of the position of every

part of the interior accessories in case you have to repack and transport it at a

later point of time.

9. The connection to the water supply should be carried out by a qualified

professional.

10. Do not operate the appliance unless all components are installed properly.

11. Do not stand or lean on the racks or the door.

12. Plastic-made items must not touch the heating elements.

13. Only wash dishwasher-proof plastic-made items in the appliance. Such items are

labelled by their manufacturer.

14. After each rinse cycle check that the water-softener container is empty.

15. Never use cleaning sprays to clean the door as they can damage the lock and

electric components.

2. Installation

2.1 Unpacking and Positioning

1. Unpack the appliance carefully. Completely remove the transport-protection. Be

very careful and do not use any aggressive or abrasive detergents to remove

residuals of the transport-protection.

2. The spray arms may be equipped with a transport protection. Remove the

transport protection before installing the appliance.

3. Install the appliance in a dry and well-ventilated place.

4. Install the appliance on a level, dry and solid floor. Check the correct installation

with a bubble level.

5. Connect the appliance to the mains properly.

6. The nameplate is inside the appliance or at the back.

Under-worktop installation

You can install the appliance under a worktop. Proceed as follows:

1. Remove the worktop of the appliance. Remove the 2 screws on the backside, lift

the panel slightly and pull it forward.

2. You must install a sheet-metal cover

as a vapour barrier. You can purchase such

covers in your local DIY warehouse.

Not included in delivery.