Instruction Manual

~ 85 ~
INSTALLATION OF THE HOB
1. Before installing the hob, you must fix the adhesive seal
21
on the bottom edge of
the hob properly (s. fig. below).
The seal must be fitted tightly on the bottom edge of the hob (no overlaps, no
gaps etc.) to prevent liquids etc. from entering the installation opening
subsequently.
Fig. similar.
1
SEAL
2
HOB
3
WORKTOP
4
OUTER EDGE OF THE HOB
5
OUTER SIDE OF THE SEAL
6
BOTTOM OF THE HOB
2. Install the fixing brackets on the housing of the appliance (s. the following
description).
HOW TO INSTALL THE FIXING BRACKETS
a. Place the appliance on a stable and soft surface (use the packaging).
b. Do not exert any physical force to the control elements of the appliance.
c. Install the fixing brackets on the sides of the hob using the corresponding
screws: screw one end of the fixing brackets into the pre-drilled holes (as shown
in the fig. below).
21
Depending on model.