Instruction Manual

~ 127 ~
MALFUNCTION
POSSIBLE CAUSES
MEASURES
THE GLASS CERAMIC IS SCRATCHED.
1. You used unsuitable cookware with
sharp edges.
1. Use suitable cookware.
2. You used an unsuitable detergent,
e.g., an abrasive.
2. Use suitable detergents.
SOME COOKWARE MAKE CRACKING OR CLICKING NOISE.
1. Your cookware is produced with
layers made of different kinds of
metal.
1. This is normal for such a cookware
and does not indicate a malfunction.
THE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY, AN ACOUSTIC SIGNAL SOUNDS AND AN
ERROR CODE IS DISPLAYED
31
(TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER-DISPLAY).
1. Technical malfunction.
1. Note the complete error code
32
,
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at
THE APPLIANCE DOES NOT HEAT.
1. You have not set a temperature.
1. Set a temperature.
2. You have not set the timer
33
.
2. Set the timer.
3. The heating element is defective.
3. Please contact the aftersales service.
THE INTERNAL LIGHT DOES NOT WORK.
1. The illuminant is loose or damaged.
1. Tighten or replace the illuminant.
NOISE CAUSED BY THE FAN INSIDE THE APPLIANCE.
1. The cooling-fan the appliance is
equipped with
34
protects the
electronics from being overheated. It
may continue to run even after you
have switched the appliance off.
1. Normal operating condition. Do not
disconnect the appliance from the
mains while the fan is running.
31
Depending on model.
32
Depending on model.
33
Depending on model.
34
Depending on model.