Instructions

28
3. Drill two 8 mm holes to install bracket 2. Fasten bracket 2 on the wall using the
2 provided screws.
4. Fix the chimney using the two screws.
1
Bracket 2
1
4*8 mm screws
2
4*30 mm screws + dowels
5. Insert the grease filters and connect the appliance to the mains
3
.
 Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
3
If the socket is covered by the chimney, you must plug in the appliance at an
earlier point in time.