Instructions

~ 59 ~
SPECIAL INSTRUCTIONS FOR APPLIANCES WITH A STAINLESS-STEEL CASING
15
❖ To clean stainless-steel surfaces, use a non-abrasive stainless-steel cleaning agent
only.
NOTICE! Never use stainless steel cleaner for the direct environment of
the control panel or the control panel itself.
NOTICE! Aggressive detergents such as abrasive detergents, vinegar
cleaners, etc. damage the surface of the extractor hood.
6.1 Grease filters
WARNING! Failure to follow the cleaning instructions will increase the
RISK OF FIRE due to fat deposits.
NOTICE! The colour of the metal surface may change due to frequent
cleaning as well as the use of aggressive detergents. Such changes do
not influence the capacity of the appliance and are no reason for
complaint.
NOTICE! Do not damage the grid of metal-made (aluminium) grease
filters.
You do not need to replace grease filters / aluminium grease filters.
❖ Clean the filters by hand or in a dishwasher regularly (up to 30 °C).
❖ Do not use any acrid or corrosive detergents.
❖ Do not use any abrasive detergents!
❖ Do not use any alkaline dishwasher-detergents! (pH more than 7).
CLEANING INTERVAL FOR ALUMINIUM GREASE FILTERS
➢ Every 2 - 3 weeks according to the frequency of use of the extractor hood.
MANUAL CLEANING OF THE ALUMINIUM GREASE FILTERS
1. Soak the aluminium grease filters in warm rinse water (up to 30 °C)
2. Then clean the grease filters with a soft brush. Be careful not to damage the grid
of the grease filters.
15
Depending on model.