Instructions

~ 54 ~
WARNING! Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in your
household fuse box).
HOW TO INSTALL THE CARBON FILTER
1. If you want to replace the CARBON FILTER, you must remove the ALUMINIUM
GREASE FILTER first. Press the lock and pull the ALUMINIUM GREASE FILTER
downwards (s. fig. below).
2. The CARBON FILTER is installed on the motor.
3. Place the CARBON FILTER on the motor and turn it clockwise until it is firmly
tightened (s. fig. below).
Fig. similar: modifications are possible.
A
MOTOR
B
CARBON FILTER
C
CLOCKWISE ROTATION = Place the CARBON FILTER on the motor
and turn the filter clockwise until it is installed properly.
4. Reinstall the ALUMINIUM GREASE FILTER.
5. If you want to uninstall the CARBON FILTER, turn the filter anti-clockwise and
remove it.
WARNING! Install the carbon filter safely and properly; otherwise, the
carbon filter can loosen and cause hazardous situations.
NOTICE! The suction capacity is decreased by installed carbon filter.