Instructions

35
Carbon filters
Conventional carbon filters cannot be cleaned. The capacity of these filters is
limited. You can use such filters for about 3-6 months. Replace a depleted filter.
Find further information on the filter packaging.
5. Trouble shooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
The appliance does not work at all.
➢ The plug of the appliance is not
connected to the socket.
➢ The plug has become loose.
➢ The socket is not supplied with
energy.
➢ The fuse is switched off.
➢ Check the corresponding socket by
connecting it with another appliance.
➢ Check the fuse.
➢ The voltage is too low. Compare the
data on the model plate with the data
of your energy supplier.
Light is on but motor does not work.
➢ ventilation damper blocked.
➢ motor mounting defective.
➢ remove blockage.
➢ replace motor.
Abnormal motor-smells.
➢ motor defective
➢ replace motor
Smear of oil.
➢ one-way valve is leaky
➢ connection base chimney-telescopic
chimney is leaky
➢ seal the valve
➢ seal the connection with a suitable
material
Appliance vibrates.
➢ motor not properly fixed
➢ hood not properly fixed
➢ fix motor properly
➢ fix hood properly
Insufficient extracting capacity.
➢ too much distance hood-hob
➢ too much draught because of open
doors and/or windows
➢ lower position of hood
➢ close the doors/windows
Appliance is unstable.
➢ mounting rail is not firmly fixed
➢ screws are not firmly tightened
➢ fix mounting rail properly
➢ tighten the screws