Instructions

31
8. Fix the chimney-installation bracket below the ceiling on the wall using the screws
and dowels.
Screw chimney ↔
bracket
Screw chimney ↔
bracket
9. Lay the exhaust hose to the wall
outlet. Fix the exhaust hose with the
cable tie (1) on the wall-outlet.
10. Fix the top chimney on the installation bracket (look also on step 8).
11. Insert the grease filters and connect the appliance to the mains
4
.
➢ Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
2.3 Carbon filter
UNPLUG THE APPLIANCE BEFORE
INSTALLING THE CARBON FILTER.
FOR RECIRCULATING MODE ONLY.
1
OPEN
2
CLOSE
You can order the carbon filter at
www.pkm-online.de!
Type name of the carbon filter: s. chapter TECHNICAL DATA
4
If the socket is covered by the chimney, you must plug in the appliance at an earlier point in
time.