Instructions

and adjusting the mounting angle of the horn such that the center of travel has the servo horn pointing
downwards. Note, it's OK to move the servo in this way even though it requires a fair amount of force. And it
makes a cool sound!
3. Find one of the servo horn fasteners in the one of the servo baggies. (Refer to the fastener picture above.)
Screw the servo horn tightly. (In the picture below, the servo is shown with the servo horn pointing downwards,
which should be roughly the center of travel.)
4. Remove the paper backing on the pan/tilt body (the smaller of the two acrylic parts).