Operation Manual

Connection with the camera

Open the background light of display

Preparation for installation and usePreparation for installation and use

1. First, fix the camera on the tripod or other fixed bracket.

2. Open protective cover of external shutter socket and

put the shutter plug of shutter connect cable in place,

then make sure it has been fixed firmly.

For most of camera shutter socket, there is mis-plug interface,

please note insert direction so as to avoid damage to shutter

socket.

3. Insert the input plug of shutter connect cable into the

output control socket of TC-252.

The timer remote control will not be able to control the camera if

the shutter connect cable hasn't insert correctly.

4. Open the camera power.

Press and hold the background light button for 3 seconds,

the background light will be turned on.

Open the background light and press the button twice each 6

seconds, the background light will keep lit.

The background light will not be close by hand; it will turn off

after 6 seconds automatically without any operation.