Operation Manual

The icon of timing shots
12
The icon of interval time
11
The icon of exposure time
10
The icon of delay time
9
8
Low battery voltage icon
7
Delay shooting icon
6
[ ]shooting icon
4
Single shooting icon
Function area
3
7
6
Display
Input plug
Shutter connect plug
Preparation for installation and use
Install and replace the battery
1. Slide and open the battery cover.
3. Close the battery cover.
Shutter connect cable
1
3
2
4
5
6
7
8
10
9
Display
11
12
13
1
2
1
2
The name of each part
1
Timing plan function area
2
Time display area
5
Continuous shooting within one second icon
Before use, you should read the user manual of your camera carefully;
understand the manipulation and functional setting. The function setting of
camera may influence the efficiency control of the camera.
The low battery voltage icon[ ] will twinkle or the character
become dim obvious when the power is not enough, that
means the low battery voltage has already influence the
normal work of the device, which needs to replace the battery
in time. The timer remote control uses 2pcs of AAA batteries;
Please follow the steps to replace the battery if needed.
2. According to the signs of positive [+] and negative [-] in
the battery compartment to install the battery correctly.
You should pay attention to the polarity of battery because of
the wrong installation will make the device work abnormally,
or even physical injury.
DC0 DC1 DC2
E3 N3
RS1
S1 UC1