Instruction Manual

ManualsBrandsPIXEL ManualsMotorcycle KitPixel SXMLCR72-VR1 - Roady BT Compact Motorcycle Kit

SXMLCR72-VR1 - Roady BT Compact Motorcycle Kit

Installaon Instrucons

Pixel Technologies, Inc. | www.pixelsatradio.com | contactus@pixelsatradio.com | (800) 595-0845 | Page 1

Package Includes

(1) SiriusXM™ Roady BT Display Controller

(1) Intelligent Power Adapter

(1) Handlebar Clamp Mount

(1) RAM Ball Mount Adapter (25 MM)

(1) Weatherproof Protecve Case

(1) SiriusXM™ Antenna

(1) Auxiliary Cable

(1) L-Bracket with AMPS Plate & Lock Ring

(1) AMPS Plate (Male Dual Notch) with Screws

(1) Display Cable

Loosen this screw

Rubber inserted here

Step 1 - Install Clamp Mount

Before geng started, it is important to select an installaon locaon for the protecve case with receiver.

Aer selecng the installaon locaon for the protecve case, loosen the two screws on the handlebar

clamp mount all the way out and separate it from the back side of the clamp mount. Place the clamp mount

on the handlebars, line up the screw holes and ghten the screws to mount the clamp. Use the supplied rub-

ber strips to increase the grip of the mount.

BACK PLATE ASSEMBLY

Locate the bag containing the parts shown below.

AMPS Socket Plate with Lock Ring

Dual Male AMPS Plate

Metal L-bracket

Summary of content (4 pages)

PAGE 1
SXMLCR72-VR1 - Roady BT Compact Motorcycle Kit Installa on Instruc ons Package Includes (1) SiriusXM™ Roady BT Display Controller (1) Intelligent Power Adapter (1) Display Cable (1) Handlebar Clamp Mount (1) RAM Ball Mount Adapter (25 MM) (1) Weatherproof Protec ve Case (1) SiriusXM™ Antenna (1) Auxiliary Cable (1) L-Bracket with AMPS Plate & Lock Ring (1) AMPS Plate (Male Dual Notch) with Screws Step 1 - Install Clamp Mount Before ge ng started, it is important to select an installa on loca on for the pr
PAGE 2
Place the parts as pictured below. Take the AMPS Socket Plate and place it on one side of the L-bracket. Next, place the Dual Male AMPS Plate on the opposite side as the AMPS Socket Plate and line up the screw holes. Please note the posi oning of the Dual Male AMPS Plate with the notches at the bo om. The dual notches must be posi oned at the bo om in order to properly seat into the back of the case. Use the supplied screws and nuts to secure the plates to the L-bracket.
PAGE 3
Roady BT Intelligent Power Adapter Unlike SiriusXM Dock and Play receivers, the tuner for the Roady BT is built into the Intelligent Power Adapter (cigare e lighter power adapter). This means you will need to bring the display controller and power adapter with you when moving the unit from motorcycle to car or other loca on. The power adapter also has all the connec ons that would normally be Auxiliary Audio Out FM Audio Out Antenna Port on a docking cradle for older Sirius, XM and SiriusXM receivers.
PAGE 4
Step 3 - Connect Display Controller Included in the package is a micro USB to micro USB cable that powers the display controller. Run that cable from the power adapter to the protec ve case. Feed the wire up through the bo om of the case as shown in the ﬁgure to the right. The case has several diﬀerent sized spacers. Use the spacer that best mounts the display controller inside the case. Note: Using all spacers will give you the best results when pressing bu ons.