Operation Manual

7
3. Trigger the Flash.
1.Insert flashg un on the
receiver and turn on the
flash power; set the
flash index as minimum.
2. Press the button CHSET
and GP SE at the same time.
ON
OFF
ON
OFF
CH
SET
GP
SET
+
+
+
Device Connection
1.
2.
3.
Tight the Hot shoe with screw, and then
turn right to relax.
Plug the transmitter on the camera hot shoe.
Tight the Hot shoe with screw, and then
turn left to lock.
Connect the Transmitter to Hot Shoe
1.Plug the PC cord into
transmitter PC socket.
2.Plug the PC cord to
camera PC socket.
（ ）Transmitter
Connect the Transmitter to Camera via PC cable.
(1 (2
*PC-PC cable should be purchased separately.