Operation Manual

GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
6
Group setting on transmitter
Slightly to press “GP SET” button to show the currently group.
2. Press “GP SET” again to change the group.
Group changing as:
A →B →C→A、B →A、C→B、C→A、B、C→A→
1.
3.
Group setting
4.Press “GP SET” for 2sec again or leave the button for 4sec,
Group display light turn off at that time.
2.
3.
Press “GP SET” again to change the group.
Group transmitting order:
A→B→C→A→
Group setting on receiver
Slightly to press “GP SET” button to show the currently group.1.
* When A,B,C indicator light is on mean the transmitter is synchronizing the
receiver.
4.Press “GP SET”for 2sec again or leave the button for 4sec,
Group display light turn off at that time.
* Receiver only get signal from transmitter when the current group
setting of receiver is included in the validate group of transmitter.
1.
2.
3.
Check power on or off.
Check the channel of transmitter and receiver.
Check the group setting of transmitter and receiver.
Testing the receiver signal as below:
Testing: