Operation Manual

3
Thank you so much for purchasing PIXEL product, BISHOP is a
professional grouping flash trigger. TTL mode available on transmitter
hot shoe and sync with off shoe trigger together. Off shoe trigger can
be grouped the flash and shutter the camera. BISHOP is using global
free FSK 2.4GHz which is more stabilize.
1. Make sure the camera is powered off before install device.
2. This is electronic products accessories; one of the environment
causes may affect the working. However this is hardly ever to get
this situation, don't worry!
3. This component can't be strong vibration, or may lead to product
failure.
4. For a long time non-use, please turned off the transmitter and the
receiver's power and remove the battery.
5.The batteries should not install anti-polarity; otherwise the
batteries may leak. corrosive liquids, heat or explosion.
6. When the product connected to the device, Do not pull the wires.
7. Do not put it in high temperature, such as a closed car under direct
sunlight, the control panel and other high-temperature areas.
8. keep dry, do not use wet hand contact with te product, the product
must not be immersed in water or exposed to rain, and this may lead
to not work properly.
9. Do not use flammable gases in violation of this warning may cause
an explosion or fire.
10.Because of this product is included battery; please strictly follow
the instruction for operation. Otherwise its may cause an
explosion, fire or personal injury.
Overview
Cautions before use
1.BISHOP is a professional grouping flash trigger
2.Transmitter hot shoe support TTL and sync with off shoe flash.
3.Wake-up function available, the flash will be wake up automatically.
4.Through studio light to connect PC or USB socket, the sync speed
up to 1/320s(
).
5. Available to control the shooting or through master camera to
control slave camera.
.
Sync time may have little bit inacurracy as difference
camera model
Feature