Product Manual Digital Flash Trigger Receiver Hot Shoe Stand Channel Indicator Channel button (CH SET ) Output PC socket Trigger pin Indicator USB Socket Group set button (GP SET) Power Switch Group Indicate 1
Transmitter Hot Shoe Stand Channel Indicator Trigger pin Channel button (CH SET ) Input/Output PC socket USB Socket Indicator Group set button (GP SET) Power Switch Group Indicate ON OFF Trigger pin for Canon for Nikon for Sony for Olympus/ Panasonic Compatible BISHOP model compatible list as below: Model Transmitter For Canon Canon series camera For Nikon Nikon series camera, Samsung series camera, Fujifilm series camera, Pantex series camera For Sony Sony series camera, Minolta series c
Overview Thank you so much for purchasing PIXEL product, BISHOP is a professional grouping flash trigger. TTL mode available on transmitter hot shoe and sync with off shoe trigger together. Off shoe trigger can be grouped the flash and shutter the camera. BISHOP is using global free FSK 2.4GHz which is more stabilize. Cautions before use 1. Make sure the camera is powered off before install device. 2. This is electronic products accessories; one of the environment causes may affect the working.
Specification Wireless Frequency System : Operating Distance: Shutter Sync Speed: Group setting: Wireless Channel: Operating Time: Power: Weight: FSK2.4GHz up to 200m 1/320s (Depend on camera) 3 difference group (7 combinations) 7 Receiver: 500 hours Transmitter: over 20k shoot AA x2 (2.4V~3.2V) Transmitter 68.5g ( without battery ) Receiver 64.0g ( without battery ) Included item: Please check the package and make sure the below items are already in the box.
Prepare to use Battery Installation Receiver and transmitter are the same installation. Turn on power Transmitter ON: Switch the power to on for trigger and shutter control OFF： Turn off the transmitter ON OFF OFF ON Receiver AA + AA - + - ON OFF OFF ON ON: Switch the power to on for operating status OFF: Turn off the receiver Channel Setting Set transmitter and receiver to the same channel 1. Slightly to press “CH SET” button to show the currently channel 2.
Group setting Group setting on transmitter 1. Slightly to press “GP SET” button to show the currently group. 2. Press “GP SET” again to change the group. 3. Group changing as: A →B →C→A、B →A、C→B、C→A、B、C→A→ GP SET GP SET GP SET GP SET GP SET GP SET GP SET GP SET 4.Press “GP SET” for 2sec again or leave the button for 4sec, Group display light turn off at that time. * When A,B,C indicator light is on mean the transmitter is synchronizing the receiver. Group setting on receiver 1.
CH SET OFF GP SET ON OFF 1. Insert flashgun on the 2. Press the button CHSET receiver and turn on the flash power; set the flash index as minimum. ON 3. Trigger the Flash. and GP SE at the same time. Device Connection + + 1. Tight the Hot shoe with screw, and then turn right to relax. 2. Plug the transmitter on the camera hot shoe. 3. Tight the Hot shoe with screw, and then turn left to lock. + Connect the Transmitter to Hot Shoe (1 1.Plug the PC cord into (2 transmitter PC socket. 2.
1. Split the protection film on the receiver holder and stick it on the sturio light as figure. 2. Fix the Receiver on the Receiver holder. 3. According to use the PC-3.5 or PC-6.3 on the studio light socket. 4.Insert PC plug into receiver PC output socket. 5. Insert other plug into the socket of Studio Light. Connect the Receiver to Studio Light 1. Unlock the Speedlite Flash locking screw 1 3 2 2. Insert the Speedlite Flash into the receiver hot shoe socket as figure. 3.
Figure Explaination Off-camera TTL Flash + off-camera flash trigger remote control By using of the TTL off-camera cable to trigger the off-camera flash when the Speedlite TTL flash works.
Speedlite flash TTL + off-camera flash trigger remote control The transmitter supports the Speedlite flash and will not hamper TTL communication of camera. Furthermore, it will send the sync signal and trigger the off-camera flashgun meanwhile.
Off-camera flash remote control Transmitter installed on camera hot shoe, and trigger the flash light.
Transmitter input/output PC socket Transmitter on top TTL, PC sync trigger, off-camera sync trigger. OFF ON Camera on top TTL, PC off-camera sync trigger.
Flash grouping remote control Receiver A、 B、 C will operate when transmitter set at A、 B、 C. Receiver A、B will operate when transmitter set at A、B.
Receiver B will operate when transmitter set at B. Receiver A will operate when transmitter set at A.
Using under incompatible mode When the transmitter is incompatible with the camera, you should use it as below. Press TEST button (Press “CH SET” and “GP SET” button in the meantime) to activate incompatible mode. The using mothed is same as the compatible mode. * If press button or shooting interval time is over than 30sec, you have to press the TEST button to set it again, If you don't press TEST button, it may cause error situation.
Master camera control the slave camera Receiver Transmitter Master Camera Slave Camera Half press release button of master camera, the main-control camera and all remoted cameras will focus, press fully, all cameras will shoot. Caution 1. As camera response time is little bit difference, the shooting time may have a little bit inaccuracy 2. If didn't find the focus, Part of cameras will not shoot even receiving the shooting signal. At that moment you should change the focus mode into manual mode “MF”.
