Compact Studio Flash PIXAPRO® LTD. Unit 5 Sterling Park Pedmore Road Brierley Hill DY5 1TB Tel: +44 (0)121 552 3113 Web: www.essentialphoto.co.uk E-mail: info@essentialphoto.co.uk Company Registration No.
Warning FOREWORD Thanks for choosing LUMI II series studio flash. It is a durable and good quality strobe with complete functions to help photographers create desired lighting effects. The product is suited for wedding, portrait, and product photography. The LUMI II flash offers: Built-in PIXAPRO 2.4G wireless ST-III System Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0-10.0) in 0.
LCD Panel NAMES OF PARTS 3 2 Body 4 11 12 5 13 4 3 7 FUSE: 5A AC220V-240V~50Hz 2 8 14 8 6 1 6 7 10 9 S CH 1 5 17 15 18 9 OFF PROP 12 % 11 10 1. Built-in 2.4G Wireless Transmission 2. Built-in Wireless Channel 3. Built-in Wireless Channel Dial 4. Slave Model Indicator 5. Beep 6. Temperature Alarm Display 7. Built-in Wireless Group 8. Flash Output 9. Modeling Lamp is off 10.Modeling Lamp is in the PROP mode 11.Modeling Lamp shows the power in percentage 12.
OPERATIONS Flash Preparation 1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector. (To uninstall the standard reflector, press the release button on the flash head and turn the standard reflector counter-clockwise to take it out, as illustrated in the picture.) 2. Attach the flash unit onto an appropriate light stand. Adjust the mounting bracket (16) for a good angle and make sure it is tightened and fixed.
Slave Trigger Model Three slave triggering models are available and can be set by pressing slave model button (6). ◆No optical control: S1 or S2 is not displayed on the LCD panel, indicating the slave triggering function is shut down. ◆Optic S1 Secondary Unit Setting: In M manual flash mode, press button so that this flash can function as an optic S1 secondary flash with optic sensor.
The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering. To control the flash wirelessly, you need a PRO AC 2.4GHz remote control set (on-camera and on-flash). Insert its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera hot shoe. Settings made on the hotshoemounted transmit and receive ends will be wirelessly communicated to the flash.
