Instruction Manual

7. M: Wireless Flash Shooting with Manual Flash

This describes wireless (multiple shooting) using manual flash. You

can shoot with a different flash output setting for each receiver unit

(firing group). Set all parameters on the transmitter unit.

Setting the flash mode to

1 <M>.

Taking the picture.

Setting <M> Flash Mode

You can directly operate the receiver unit to manually set the manual

flash or stroboscopic flash.

Setting the receiver unit.

Setting flash mode to <M>.

● Press <MODE> button so

that <M> is displayed.

● Set the manual flash

output. (Page 13)

Setting flash

2 output.1/2/3/4<M/A/B/C>

● Press Function Button 3

< >. Turn the Select

Dial to set the flash output

of the groups. Press Set

Button to confirm.

● Each group fires at the set

flash ratio.

8. Multi: Wireless Flash Shooting with Manual Flash

Setting <MULTI> stroboscopic

flash.

● Press <MODE> button so that

<MULTI> is displayed.

● Setting the stroboscopic flash.

(Page 14)

Olympus/Panasonic

CH 21

Other Applications

Sync Triggering

The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here

and the flash will be fired synchronously with the camera shutter.

- 21 - - 22 -