User Manual

Skimbot Functionality
This feature allows the user to select
the robot’s travel speed through the
water.
The factory setting for this feature is
AUTO. This will normally result in
the surface of an average residential
pool being fully covered in about two
hours.
The user can select either high or low
speed, depending on their prefer-
ence.
Choosing low speed will draw less
battery power and extend the oper-
ating time of the unit.
Choosing high speed will result in the
pool surface being covered more
rapidly.
Speed Distance to Edge
Surface Type
Key Lock Beep Alert
This feature allows the user to adjust
the sensitivity of the robot for turning
as it approaches the edge of the pool.
The setting options for Distance to
Edge are:
Very Low: Skimbot will get
very close to edge before turning
Low
Middle
High
Very High: Skimbot will turn well
before it reaches the edge
The factory setting for this feature is
‘Middle’.
This allows the user to select between a
standard pool configuration or a more
natural water feature such as a pond with
more irregular or natural edges.
This feature allows the user to lock out
the Start/Stop button on the robot
switch panel.
Occasionally, a water feature or some
other obstacle can inadvertently impact
the Start/Stop button on the switch
panel of the robot, causing the robot to
turn o.
To prevent this from happening, go to
the SETUP menu of the App and
activate the Key Lock feature.
You can use this as an anti-theft feature
as it will only allow Skimbot to be turned
o using the App.
This feature on the SETUP
menu activates the audible
beep sound when the unit
begins to move or when the
unit reaches a dangerous
temperature.
Reset
This function on the SETUP
menu can be used to reset
the robot to its original
factory settings.