SAFETY DATA SHEET Date of issue/Date of revision 24 August 2015 Version 3.01 Section 1. Identification Product name : Ultra Interior Satin White/Pastel Base Product code : 41-210 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Product use : Consumer applications. Use of the substance/ mixture : Coating. Paints. Painting-related materials. Uses advised against : Not applicable.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 2. Hazards identification General Response : Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 4. First aid measures Most important symptoms/effects, acute and delayed Potential acute health effects Eye contact Inhalation : No known significant effects or critical hazards. : No known significant effects or critical hazards. Skin contact : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Do not store below the following temperature: 5°C (41°F). Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 8. Exposure controls/personal protection Individual protection measures Hygiene measures Eye/face protection Skin protection Hand protection Body protection Other skin protection Respiratory protection : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 9. Physical and chemical properties Density ( lbs / gal ) : 10.1 Solubility : Insoluble in the following materials: cold water. Partition coefficient: noctanol/water : Not available. Viscosity : Kinematic (40°C (104°F)): >0.21 cm2/s (>21 cSt) Volatility : 72% (v/v), 59.29% (w/w) % Solid. (w/w) : 40.71 Section 10.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 11. Toxicological information Conclusion/Summary : There are no data available on the mixture itself. Carcinogenicity Conclusion/Summary : There are no data available on the mixture itself.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 11. Toxicological information Short term exposure Potential immediate : There are no data available on the mixture itself. effects Potential delayed effects : There are no data available on the mixture itself. Long term exposure Potential immediate : There are no data available on the mixture itself.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 15. Regulatory information United States United States inventory (TSCA 8b) : All components are listed or exempted. U.S. Federal regulations SARA 302/304 SARA 304 RQ : : Not applicable. Composition/information on ingredients No products were found.
Product code 41-210 Date of issue 24 August 2015 Version 3.01 Product name Ultra Interior Satin White/Pastel Base Section 16. Other information Indicates information that has changed from previously issued version. Disclaimer The information contained in this data sheet is based on present scientific and technical knowledge.
