SAFETY DATA SHEET Date of issue/Date of revision 24 August 2015 Version 6.01 Section 1. Identification Product name : Ultra Interior Flat White/Pastel Base Product code : 41-110 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Product use : Consumer applications. Use of the substance/ mixture : Coating. Paints. Painting-related materials. Uses advised against : Not applicable.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 2. Hazards identification Hazard statements : Causes skin and eye irritation. May cause cancer. Causes damage to organs through prolonged or repeated exposure. Precautionary statements General Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Read label before use. Keep out of reach of children.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 4. First aid measures If ingestion, irritation, any type of overexposure or symptoms of overexposure occur during or persists after use of this product, contact a POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN immediately; have Safety Data Sheet information available. Never give anything by mouth to an unconscious or convulsing person.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. Specific hazards arising from the chemical : In a fire or if heated, a pressure increase will occur and the container may burst.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 8. Exposure controls/personal protection Ingredient name Exposure limits titanium dioxide OSHA PEL (United States, 2/2013). TWA: 15 mg/m³ 8 hours. Form: Total dust ACGIH TLV (United States, 4/2014). TWA: 10 mg/m³ 8 hours. ACGIH TLV (United States, 4/2014). TWA: 0.025 mg/m³ 8 hours. Form: Respirable OSHA PEL Z3 (United States, 2/2013). TWA: 10 MG/M3 / (%SiO2+2) 8 hours.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 8. Exposure controls/personal protection Appropriate engineering controls Environmental exposure controls : If user operations generate dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 9. Physical and chemical properties Flammability (solid, gas) : Not available. Lower and upper explosive (flammable) limits Evaporation rate : Not available. Vapor pressure : 2.3 kPa (17.4 mm Hg) [room temperature] Vapor density Relative density : Not available. : 1.25 Density ( lbs / gal ) : 10.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 11. Toxicological information Skin Eyes Respiratory Sensitization : There are no data available on the mixture itself. : There are no data available on the mixture itself. : There are no data available on the mixture itself. Conclusion/Summary Skin : There are no data available on the mixture itself. Respiratory : There are no data available on the mixture itself.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 11. Toxicological information Eye contact : Causes eye irritation. Inhalation : No known significant effects or critical hazards. Skin contact : Causes skin irritation. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : Adverse symptoms may include the following: pain or irritation watering redness Inhalation : No specific data.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure titanium dioxide Acute LC50 >100 mg/l Fresh water Daphnia - Daphnia magna 48 hours Persistence and degradability Not available. Bioaccumulative potential Not available. Mobility in soil Soil/water partition coefficient (KOC) : Not available. Section 13.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base 14. Transport information Marine pollutant substances Not applicable. Not applicable. Not applicable. Additional information DOT : None identified. IMDG IATA : None identified. : None identified. Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure.
Product code 41-110 Date of issue 24 August 2015 Version 6.01 Product name Ultra Interior Flat White/Pastel Base Section 16. Other information Hazardous Material Information System (U.S.A.) Health : 2 * Flammability : 1 Physical hazards : 0 ( * ) - Chronic effects Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.
