Instructions / Assembly

2.22 Follow the procedures in the straight wall section for leveling each glass block. Use a level to check the alignment of each course of glass blocks.
2.23 Make certain your glass blocks are level from beginning to end. Now you need to assemble the first set of horizontal spacers. Insert a wall anchor in the end of a
23
3
/
8
inch horizontal spacer.
-9-
2.24 Next, slip the tab of an ARQUE
®
spacer into the other end of the horizontal spacer. The tabs of the three ARQUE
®
spacers slid into each other slots. Now slide the tab
of the last ARQUE
®
spacer into the 4
7
/
8
inch horizontal spacer.
2.25 Adjust the spacers to fit firmly on top of each glass block.