Instructions / Assembly

2.21 Apply four
1
/
2
inch dabs of sealant to the installed ARQUE
®
vertical spacer. Next apply a
1
/
2
inch bead of sealant around the inside perimeter of the finishing unit,
then install it on the 4
7
/
8
inch horizontal spacer.
2.20 Repeat these procedures for the next two ARQUE
®
glass blocks. Apply four
1
/
2
inch dabs of sealant to the side of the last installed ARQUE
®
glass block and apply a
1
/
2
inch bead of sealant around the inside perimeter of the markings on the curb for the 4
7
/
8
inch horizontal. Install the ARQUE
®
vertical spacer and the 4
7
/
8
inch
horizontal spacer.
2. GLASS BLOCK INSTALLATION
(Curved wall section - Continued)
-8-
2.18 Install the first ARQUE
®
horizontal half spacer with tabs removed. Apply four
1
/
2
inch dabs of sealant to the side of the last 6 inch x 8 inch glass block, next install
the ARQUE
®
vertical spacer.
2.19 Apply a
1
/
2
inch bead of sealant around the perimeter of the first ARQUE
®
glass block, next, apply four
1
/
2
inch dabs of sealant to the installed ARQUE
®
vertical
spacer. Install the ARQUE
®
glass block, sealant side down.