User's Manual
20
PITTASOFT
3 Video & Image Configuration
ⵐVideo Setting
x I frame interval: Use this to set I
frame(Key frame) interval. If set lower
value, quality will be better but, at higher
bandwidth requirement. (1~60)
x Bitrate:
Variable bit rate: Bit rate is adjusted
automatically according to the variation
in the video images.
&RQVWDQWELWUDWH%LWUDWHLV¿[HG
regardless of the variation in the video
images. (Minimum: 16 kbps, Maximum: 3000 kbps)
ⵑJPEG Image Setting
Use this to set the compression ratio of images to be uploaded to the FTP server or
attached to the email.
x JPEG Resolution (D1/VGA/WVGA/XGA/SXGA): Select the resolution
x Compression Ratio (0~100): Use this to set the compression ratio. The size of the
image becomes smaller as the set value becomes greater
x Text Overlay: Use this to insert date, time and message to the image to be uploaded
to the FTP server or attached to the email. Supports up to 20 letters.
4 Sensor Configuration
ⵐColor Setting
x Contrast: Use this to adjust contrast.
x Brightness: Use this to adjust
brightness.
x Saturation: Use this to adjust saturation.
x Hue: Use this to adjust hue.
✎ Press 'Default' button to change to initial
value.
Pitta IP Utility and Pitta Web View
Pitta WebView-Setup Menu