User's Manual

PITTASOFT

Pitta IP Utility and Pitta Web View

Pitta WebView-Setup Menu

❚ Advanced

1 User

Change Admin's ID and Password.

Change User ID, Password and authority.

✎ You can use up to 4~32 (A-Z, a-z, 0-9,. _

available) and 4~10 (available to use all

characters) to make ID and Password,

respectively.

✎ Default initial values of administrator's ID and

Password are admin/admin.

✎ If you forgot ID/Password, press 'RESET' button to initial setting. (admin / admin)

All the settings will be changed to initial setting.

2 Network Settings

IP and Ports

Camera IP address setting page. It's equivalent to IP Utility setting. (T pages 12~13)

✎ Also use this setting for the camera is set in different subnet mask.

ⵐIP and Port Setting

x Obtain an IP address automatically: Use

this to assign the IP address of the

camera automatically.

x Use the following IP address: Use this

to assign the IP address of the camera

manually.

x Video Port No: Enter Video Port

number. Default is 50001.

x Web Port No: Enter Web Port number.

Default is 80.