Front Side Installation Manual

Installation instructions Front Side

Important!

When the control knobs are not properly adjusted the

burners will not ignite or burn evenly.

For warranty and the proper functioning of the cooking

unit ensure the mounting is as described in this manual to

the letter.

7. Place the heat shields including the

sealing ring (step 2) on the burners and

screw them with the supplied screws.

1. Overview of the various parts.

2. Carefully press the sealing ring over

the edge of the heat shield. Check

whether the ring fits well in its entirety.

3. Overview of the set screws (S).

5. Place the flanges in the designated

cutouts and position the unit carefully

under the worktop. Check that the heat

conductor is positioned correctly.

6. Check that the flanges are centered in

the cutouts. Note: if this is not the case,

the flanges will not function properly.

4. Turn all set screws back to approxi-

mately 3 mm above the unit. Then place

the heat conductor on the unit.

8. Always make sure that the V-shaped

indicator is in line with the shaft of the

burner housing of the wok burner. This

heat shield is attached with three screws.

9. Measure the distance between the

front of the unit and the front frame (or

blende). This distance must be 75mm.

75 mm

Installation FS 2019 NL-EN-FR-DE-ES-IT EU PC 2 combi.indd 6 4-4-2019 17:59:58