Installation and Handling Instruction

2. Manufacturing recesses (cut-outs)
!
The guidelines of the kitchen manufacturer and/or the manufacturer of the kitchen
worktop should always be strictly followed.
2a. The C-size should be at least 50 mm (fig.1). With the XL models, it should be at least 75 mm
(fig.2). The distance between the cut out and the sides (left or right) of the worktop should
be at least 150 mm.
Fig. 1 Fig. 2
2b. The insides of the recess(es) should be smooth and even (fig. 3). Irregularities can
cause cracking (fig. 4).
Fig. 3 Fig. 4
2C. On the top and bottom of the recess(es) should be a facet of at least 1x1 mm be
applied (with exception for Solid Surface) (fig. 5).
Fig. 5
Facet 1x1 mm
35
35
3