- LPS-1LABEL PRINTER USER GUIDE

5
z GETTING STARTED
LPS-1 Components
LPS-1 Label Printer
 Front
 Back
LPS-1 Components
FEED button
LED lamp
ON/OFF button
CUT lever
LA Roll compartment cover
If the LA Roll compartment cover is left open, dust will collect on the print head. Always close the cover.
Power cord
USB port
Do not connect the LPS-1 to the USB port of your personal computer yet.
Do not connect the LPS-1 to your personal computer until
directed to do so when installing the printer driver. If the LPS-1
is connected to a personal computer that does not have the
printer driver software installed, the dialog box shown here will
appear. Click [Cancel], remove the USB cable, and then install
the printer driver software.
Refer to “Installing the Software” on page 11.