- LPS-1LABEL PRINTER USER GUIDE

31
z CREATING LABELS
Using P-touch Editor
Printing the Label
We will now print the label created in the earlier example.
1 In the Print properties box, select the number of
copies to be printed (1) and then click .
The label is printed.
2 Cut off the printed label using the CUT lever.
 Printing options and label cutting
Click in the Print properties box to open the Print dialog
box and select printing options.
zPrint Optionsz
If the Print property box is not displayed in the Property dock
click to open it.
When using the LPS-1, make sure that printing is completed
before cutting the label with the CUT lever. Attempting to
cut the label before printing is completed will result in an
error. If an error occurs, turn the power off and then on again
to clear the error.
Setting Details
Mirror Printing Prints a mirror image of the label. Use this option clear tape to
create labels that can be applied to the inner surface of glass
etc. and read from the outside.
Output Directly To Printer Driver Sends the data directly from the application to the printer driver.
We recommend that you leave this box checked when printing
labels.
Copies Selects the number of copies to be printed.
When printing a label you can select whether priority is given to print quality or print speed.
When Printing Speed over Quality has been checked, some objects may not print or the printed image
may appear slightly different.
Click to open the PB LPS-1 Properties dialog box and then select one of the Quality radio
buttons.