- LPS-1LABEL PRINTER USER GUIDE

GETTING STARTED
8
Installing the LA Roll
There is a wide range of LA Rolls available for use with your LPS-1, allowing you to create almost
any type of label you need.
Available supplies
The types of LA Rolls that may be used with the LPS-1 are listed below.
Installing the LA Roll
1 Press the ON/OFF button to turn the LPS-1 off. Hold the
LA Roll compartment cover at the sides near the front of
the LPS-1 and firmly lift up to open the cover.
2 Place the spool into the spool guides in the LA Roll
compartment.
Installing the LA Roll
Stock No. Description
LA0-2 4” Online Postage/PC Postage Label
LA0-5 Continuous Paper Tape
LA0-8 Large Address Label
LA0-9 Small Address Label
To obtain optimum performance, use only genuine Pitney Bowes accessories and LA Rolls.
• Make sure that the spool arms are inserted firmly in the
spool guides on the left and right.
• Insert the spool with the LA Roll located on the right hand
side of the LPS-1.