User's Manual

L22-375 Rev 1 6/13, Page 7
If the basket drive pin position needs adjustment.
 While holding the upper proximity switch in place, use a small screwdriver to loosen screw on the
switch. Move the switch up and down to adjust the upper position. Move the proximity switch the same
distance that the basket pin is away from its ideal location. After repositioning the switch, use a small
screwdriver to tighten the screw on the proximity switch to secure it in place.
 Press to move the basket to the middle position.
 After the basket has moved to the middle position, press to move the basket to the newly defined
upper position.
 Repeat the previous steps until the basket drive pin is positioned correctly within the drive coupling.
NOTICE
Do NOT rotate the proximity switch during this procedure. The rotation
of the switch is critical to accurately sensing the basket lift position.