Manual

TROUBLESHOOTING
13 L20-259, rev. 7 (09/13)
4.4. TROUBLESHOOTING CHART
4.5. ELECTRICAL SCHEMATIC
Problem Probable Cause Corrective Action
No power to appliance Check main building power supply
Circuit breaker tripped Reset power supply Circuit Breaker
I/O swich in the O (off) position
Press the power switch to the start Position
and release
Power cord disconnected Check power cord connection
High temperature limit tripped
A
llow the appliance to cool to room temperature
and the high limit switch will auto-reset.
Low water level Fill appliance with water level fill line(s)
Circuit breaker tripped Reset power supply Circuit Breaker
High temperature limit tripped
A
llow the appliance to cool to room temperature
and the high limit switch will auto-reset.
Low water level Fill appliance with water level fill line(s)
Control does not
activate
Appliance stops
heating