- Pitco Compact Pasta Control Operations Manual

ManualsBrandsPitco Frialator ManualsPasta MakerCompact Pasta Control

L20-269 Rev 0

11/04

•

IMPORTANT FOR FUTURE REFERENCE

Please complete this information and retain this manual

for the life of the equipment:

Model #: __________________________

Serial #: __________________________

Date Purchased: ___________________

IMPORTANT FOR FUTURE REFERENCE

Please complete this information and retain this manual

for the life of the equipment:

Model #: __________________________

Serial #: __________________________

Date Purchased: ___________________

Operations Manual

Covering

Compact Pasta Control

Pitco p/n 60143701

Summary of content (5 pages)

PAGE 1
• IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model #: __________________________ Serial #: __________________________ Date Purchased: ___________________ Operations Manual Covering Compact Pasta Control Pitco p/n 60143701 L20-269 Rev 0 11/04
PAGE 2
Pitco Compact Pasta Control 60143701 Table of Contents Keypad and Display Functions:.......................................................................................................... 3 Operation:............................................................................................................................................. 3 2.1 2.2 2.3 2.4 2.5 To Turn Control ON:............................................................................................................................
PAGE 3
Pitco Compact Pasta Control 60143701 1 Keypad and Display Functions: 2 Operation: 2.1 To Turn Control ON: When power is applied to the appliance, display will show [OFF]. Press the [ON/OFF] key. Display will show one of three possible displays depending on the water temperature; [bOIL], [Sim], or [__°F]. 2.2 To Turn Control OFF: With display showing [bOIL], [Sim], or [__°F], press and hold the [ON/OFF] key. Display will show [OFF]. 2.
PAGE 4
Pitco Compact Pasta Control 60143701 3 Programming: To enter the programming menu, press the [P] key for 3 seconds. Display will show one of two possible displays; [Pr--] for Program entry or [Loc] for locked entry. 3.1 To Unlock If control is displaying [Pr--] skip this step. While display is showing [Loc], press the Down arrow key once followed by the Up arrow key. Display will show [Pr--]. Control is now unlocked ready for programming. 3.2 To Change Simmer Temperature With display showing [PR--].
PAGE 5
Pitco Compact Pasta Control 60143701 4 Other Displays:- 4.1 Low Vat Temperature: When tank temperature is below 150°F (65°C), the display will show as blanks. This is normal for cold start-ups. Heat Demand indicator is located between the first and second digits of display. 4.2 Drain Valve Open: When drain valve is detected open, normal operations are suspended. The display will show Drain-Turn-Off message until reset. To reset, CLOSE the drain valve, turn the control OFF, then ON.