Use and Care Guide
ENGLISH
12
14.
Parts Required:
1 x Front Shelf Bracket /L
(#16-1)
1 x Front Shelf Bracket /R
(#16-2)
6 x Screw
(#A)
Installation:
• Attach one front shelf bracket to the front of the grill barrel by using three
screws. Install each screw half-way, then tighten completely when all three
screws are mounted and aligned properly.
• Repeat the same installation for the other front shelf bracket.
15.
Parts Required:
1 x Front Shelf
(#21)
2 x Screw
(#H)
2 x Washer
(#B)
2 x Bushing
(#D)
2 x Nut
(#I)
Installation:
• From underneath, insert the screw (from the outside) into the front shelf
bracket and the front shelf, then add the bushing onto the screw, the
washer, then the nut.
• Repeat the installation for the other side of the front shelf.
NOTE: When installed correctly, the front shelf can be raised (for use) and
lowered (for storage) with ease.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
weight of the unit will cause the shelves to break, which is not
covered by warranty.
16.
Parts Required:
1 x Side Burner Shelf
(#14)
1 x Side Burner Panel
(#15)
3 x Screw
(#A)
Installation:
• Unscrew the two pre-installed screws from the brace plate of the side
burner to remove it from the shelf, and set aside for re-installation in
later step. See 16A, 16B.
• Mount the side burner shelf onto the side burner panel with three
screws. See 16C.
14
161
162
15
21
16
16 16
15
14
14
14
11
11