Instructions / Assembly

16
13
17.
PLACING CONTROL KNOB INTO THE
VALVE STEM
Parts Required:
1 x Control Knob (#13)
Installation:
• Place Control Knob (#13) over the valve
stem, making certain to align the flat portion
of the stem with the flat portion of the knob
and push the Control Knob (#13) onto the
stem until it is firmly seated. as Fig.17
shown.
Fig.17
18.
SLIDING GREASE TRAY INTO THE
CONTROL PANEL
Parts Required:
1 x Grease Tray Assembly(#25)
Installation:
•Slide Grease Tray Assembly (#25) into
the grease tray support rails provided
in the bottom panel as Fig.18 shown.
Fig.18
-
-
-
-
-
-
-
-
-
-
-
-
-
-
#13
Fig.19
19.
LOOPING ZIP-TIE ONTO THE
RIGHT FRONT LEG
Parts Required:
1 x Zip-tie (#E)
1 x Right Front Leg (#22)
Installation:
•Loop the Zip-tie (#E) through outside
hole of Right Front Leg (#22) as
Fig.19 & Fig.19.1 shown.
Fig.19.1