Instructions / Assembly

14
11
Fig.12
13.
MOUNTING DOOR LATCH ASSEMBLY
TO THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
1 x Door Latch Assembly (#6)
1 X Upper Smoker Cabinet Assembly (#2)
2 x #10-24*1/2”(#C)
Installation:
•Attach the Door Latch Assembly (#6) to
the Upper Smoker Cabinet Assembly
(#2) using 2 x #10-24*1/2”(#C) as
Fig.13 shown.
Fig.14
Fig.13
12.
INSERTING HEAT INDICATOR INTO
THE DOOR ASSEMBLY
Parts Required:
1 x Door Assembly (#10)
1 X Heat Indicator (#9)
Note: The Heat Indicator is supplied
with one fiber washer and one wing
nut.
Installation:
•Insert Heat Indicator (#9) probe through
the mounting hole in the front of the Door
Assembly(#10). From the inside of the
door, place fiber washer and wing nut
onto the mounting thread pole and tighten
by hand as Fig.12 shown.
14.
MOUNTING DOOR HANDLE TO THE
DOOR ASSEMBLY
Parts Required:
1 x Door Handle (#7)
1 x Silicon Washer (#8)
1 X Door Assembly (#10)
2 x #10-24*1/2”(#C)
Installation:
• Attach the Door Handle (#7) with Silicon
Washer (#8) to the Door Assembly (#10)
using 2 x #10-24*1/2”(#C) as Fig.14
shown.